Panel feed throughs

Products 279

M12 panel feed through/PCB angled D-code

Article No.: 21 03 381 4410

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

PCB adapter

M12 panel feed through PCB angled D-kod.

Article No.: 21 03 381 4412

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

Panel feed through

HARTING PFT 7_8 inch female 4-pole

Article No.: 21 04 316 2400

With conductors, for front mounting‌20 cm

PCB adapter

M12 panel feedtrough/PCB straight D-cod.

Article No.: 21 03 381 6410

Straight, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingPolyamide (PA)

Panel feed through

HARTING PFT 7_8 inch male 3-pole

Article No.: 21 04 316 1305

With conductors, for front mounting‌20 cm

Panel feed through

PANEL FEED THROUGH M12D COD.FEMALE 4PINS

Article No.: 21 03 371 2403

With conductors, for front mounting‌50 cm

Panel feed through

panel feed through M12 Acod.male 4 pins

Article No.: 21 03 311 1402

With conductors, for front mounting‌50 cm

Panel feed through

M12 PFT D-coded female straight 0,5m

Article No.: 21 03 375 2400

With conductors, for front mounting‌50 cm

Gender changer

M12 D-Coded gender changer

Article No.: 21 03 381 6401

Panel feed throughZinc die-cast

PCB adapter

Gerätebuchse M12-D-kod.IP20 Kod.oben

Article No.: 21 03 381 4411

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

PCB adapter

M12 PCB female D-coded angled IP20

Article No.: 21 03 381 4434

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

Panel feed through

WDF M12-F-M16x1,5-A kod.-4po-m.Litze 500

Article No.: 21 03 311 2400

With conductors, for front mounting‌50 cm

PCB adapter

M12 panel feedtrough/PCB angeld D-cod.

Article No.: 21 03 381 4432

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

PCB adapter

M12 panel feed though/PCB angled D-coded

Article No.: 21 03 381 4430

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

PCB adapter

M12 panel feedtrough/PCB straight D-cod.

Article No.: 21 03 381 6420

Straight, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingPolyamide (PA)

Panel feed through

PFT male L-coded 2.5mm²

Article No.: 21 03 599 1505

With conductors, for front mounting‌30 cm

Configurable

Inserts

M23 12 Female -C

Article No.: 09 15 112 3101

Crimp terminationFemalePolyamide (PA)WhiteRated current: ‌8 AContacts: 12Conductor cross-section: 0.08 ... 1.5 mm²

Panel feed through

PFT female L-coded 2.5mm²

Article No.: 21 03 599 2505

With conductors, for front mounting‌30 cm

Cable connector

M12 angled male 4pole D-coded crimp

Article No.: 21 03 882 3405

AngledMaleD-codingCrimp terminationPolyamide (PA)Contacts: 4Conductor cross-section: 0.14 ... 0.75 mm²Rated current: ‌4 AZinc die-castScrew lockingDegree of protection: IP65 / IP67 mated condition

PCB adapter

M12 PCB female D-coded angled IP20

Article No.: 21 03 381 4435

Angled, for rear mountingReflow soldering termination (THR)Rated current: ‌4 AContacts: 4Copper alloyAu over Ni Mating sideCoding: D-codingLiquid crystal polymer (LCP)

20 (of 279)