Dis-/assemble

Assembly tool

Bit ¼in as a spare part for guiding pins and bushes

Dynamometric screwdriver

Han® VDE Screw Driver Set

Hexagonal driver

Hexagonal head screwdriver

Hexagonal scewdriver

Insertion / removal tools

One click cleaner

Pliers

Polishing paper

Polishing tool

Polishing tool HP duplex

Press-out tool

Removal tool

Replacement-tip

Screw driver

Screw driver set Slimline

Spare part

Stripping tool

Tool insert

Tool-kit

Torque set

Torque tool

+ adapter blade

+ different bits

09 14 003 3001 / 09 14 003 3101

1.25 mm

1.5 x 40

2.0 x 40

2.5 mm

40 A contact

70 A contact

Adapter 3/8in

Bit ¼in

Bottom part

Cable gland

DIN 41612

F-ST

Ferrule

For SP1 and SP2

HARTING PushPull (V4) Power

HARTING UIC 558

Han D®

Han E®

Han-Eco®

Han-Fast® Lock

Han-Modular®

Han-Modular® Flexbox

Han-Quintax®

Han-Yellock®

Han® 1A

Han® 3 A

Han® 3 A Push-In

Han® C

Han® C module

Han® EasyCon

Han® F+B

Han® HsB

Han® K 6/6

Han® Megabit module

Han® Q 5/0

Han® Q 2/0, Han® Q 3/0, Han® Q 4/0 Crimp termination

Insertion tool for coding pin

Insertion tool for single male press-in contacts

Insolated blade for slim assembly

Metal

Only measuring device

POF cable 2.2 mm diameter

SC

SC POF

SP3

Service

Small cross-section

Staf®

The standard set

Thermoplastic

Tightening torque: 0.5 ... 1.2 Nm

Tightening torque: 0.5 Nm

Tightening torque: 1 ... 5 Nm

Tightening torque: 5 ... 14 Nm

To remove single male contacts

To tighten the har-port fixing nut

Variable length of blade

With ball end

With grip

With measuring device

har-bus® HM

for 7/8"

for D-Sub crimp contact

for D-Sub hoods (50 contacts)

for D-Sub hoods (9-37 contacts)

for D-Sub mixed

for GI 1 μ-grain size

for GI 9 μ-grain size

for HARTING ix Industrial® IP20 PushPull and Mini PushPull ix Industrial® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.

for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

for HARTING ix Industrial® as pull-out aid for close-fitting ix Industrial® connectors

for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

for HARTING screw contacts and fixing screws

for Han-Yellock® modules and frames

for Han® ES insert

for Han® GND

for Han® HC Modular 250 Crimp

for High Current axial screw contact

for InduCom hoods with hexagonal screws

for LC contact in the Han® LC module

for M12 Power

for M12 Slim Design

for M12-L

for M12-S

for M8

for POF grain size 1000

for Quintax contact

for TC 70 contacts

for har-bus® HM shrouds

for axial screw

for circular inserts

for contacts BC / har-bus® 64

for contacts FC 1, FC 2 and FC 3

for crimp contacts

for flange

for ix Industrial® assembly tool

for single modules