Hand crimping tools

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

basic hand crimp tool BC/FC/har-bus64

for individual DIN 41612 contacts, BC / FC / har-bus® 64

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

D SUB HD SERVICE CRIMP TOOL

Crimptool Opening

for crimp barrel and crimp flange

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

DSUB HAND TOOLS

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

CRIMPING TOOL

for 250 bandoliered contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping tool for 1mm POF

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

DIN-Tool Crimptool Coax M

Crimp die included, for coaxial contact, acc. to DIN 41626

GDS A-B/C CRIMPING TOOL ON REEL

for 500 bandoliered contacts, BC / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm²

Ferrule Crimp tool 10mm2

for wire end ferrulesConductor cross-section: 10 mm²

DSUB HAND CRIMP TOOL OUTER COAX CONT.

for coaxial contact, acc. to DIN 41626, for outer ferrule

D-Sub DIE OUTER COAX CONTACT

for D-Sub

DIN-Tool Crimpzange FC2

for 250 bandoliered contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Crimping tool Han-Fast Lock 4-10mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 4 ... 10 mm²