Crimping

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

Locator D-Sub turned standard contacts

for single D-Sub standard contacts

basic hand crimp tool BC/FC/har-bus64

for individual DIN 41612 contacts, BC / FC / har-bus® 64

crimp set FC 3

for individual contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

Crimp set BC/FC1/har-bus 64

for individual contacts, BC / FC 1 / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts

crimp set FC 2

for individual contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts

Go / no-go gauge for 09990000888

for crimping tool 09 99 000 0888, for optional testing

DIN-Tool Ersatzhülse M

DIN 41612, for removal tool 09 99 000 0174

DIN-Tool Positionierer FC

FC, for part number 09 99 000 0620

D SUB HD SERVICE CRIMP TOOL

Crimptool Opening

for crimp barrel and crimp flange

Crimp die 16mm² for 60 kN tool

for 60 kN toolConductor cross-section: 16 mm²

Crimp die 10mm² for 60 kN tool

for 60 kN toolConductor cross-section: 10 mm²

Locator Set Han D/E/C, for Crimping tool

Spare part, Han D®, Han E®, Han® C

Crimp die 25mm² for 60 kN tool

for 60 kN toolConductor cross-section: 25 mm²

Crimp die 35mm² for 60 kN tool

for 60 kN toolConductor cross-section: 35 mm²

Hand hydraulic crimping tool 60 kN

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

Locator f. crimping-tool 09990000888

Spare part, for crimping tool 09 99 000 0888

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

DIN-Tool Positionierer BC

BC / har-bus® 64, for part number 09 99 000 0620

Locator D-Sub für. 0501 (Gigabit Modul )

for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476

DSUB HAND TOOLS

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

Han Yellock Locator for 0021 tool

Han-Yellock®

Crimp die 50mm² for 60 kN tool

for 60 kN toolConductor cross-section: 50 mm²

Battery Crimping Tool Set

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

CRIMPING TOOL

for 250 bandoliered contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping tool for 1mm POF

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

DIN-Tool Crimptool Coax M

Crimp die included, for coaxial contact, acc. to DIN 41626

Battery hydraulic crimping tool 60 kN

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

GDS A-B/C CRIMPING TOOL ON REEL

for 500 bandoliered contacts, BC / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm²