Hand crimping tools

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

Crimptool Opening

for crimp barrel and crimp flange

D SUB HD SERVICE CRIMP TOOL

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

DSUB HAND TOOLS

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

Ferrule Crimp tool 10mm2

for wire end ferrulesConductor cross-section: 10 mm²

Crimping tool for 1mm POF

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

DIN-Tool Crimptool Coax M

Crimp die included, for coaxial contact, acc. to DIN 41626

D SUB HD CR. TOOL F.500 PCS REEL- CS 20

for 500 bandoliered D-Sub high density contacts

CRIMPING TOOL FOR POF

for FO connector (plastic fibre), SC, F-SMA F-ST

D-Sub DIE OUTER COAX CONTACT

for D-Sub

Crimping Tool Han HsB 1.5/2.5/4 mm²

Han® HsB: 1.5 ... 4 mm²Conductor cross-section: 1.5 ... 4 mm²

Crimping tool for glass fibre

for FO connector (glass fibre), SC, F-SMA F-ST

DSUB HAND CRIMP TOOL OUTER COAX CONT.

for coaxial contact, acc. to DIN 41626, for outer ferrule

Hand crimping tool UIC 558

HARTING UIC 558: 0.75 ... 1 mm²Conductor cross-section: 0.75 ... 1 mm²