Digitalisation in industrial automation

HARTING interface (I/O) and board connectors are used for the transmission of power, signal, and data in HMIs.  Our connector portfolio includes both standard and unique offerings that support critical trends like robustness, miniaturization, and higher data transfer rates.  

The development towards ever smaller and more efficient devices in the IT world is well known. Yet, this trend is also found in other lines of business. Despite higher transmission rates and the parallel transmission of power (remote power feeding), cabling components need to be ever smaller and lighter. Based on transmission standards in accordance with IEEE 802.3, the new single-pair Ethernet technology SPE has just been integrated into new generations of automobiles and replaces CAN and other bus systems there. Controls, communication and safety functions are going to run uniformly on Ethernet in the future. This is a basic prerequisite for networked and later also autonomous driving.

To date, the Ethernet interface in the IP20 environment has been embodied by the RJ45 connector. This connector, which is the most widely used in the world, is omnipresent and therefore loved by users. However, due to its lack of robustness through broken locking tabs and occasional contact problems, many users experience more of a love-hate relationship with the RJ45. In view of ever smaller devices, such as flat mobile devices, displays, smaller automation devices, cameras and sensors, the size of the RJ45 puts a limit on the miniaturisation possible. Thus, a smaller and more robust plug-in connection is on the wish list of many users and developers, though one which can still produce Cat. 6A performance for 1/10Gbit/s Ethernet at a control level.

As one of the largest manufacturers of industrial connection technology, HARTING has a comprehensive portfolio of circular connectors in all common sizes and codings. The product range includes circular connectors, overmoulded cable assemblies as well as  PCB connectors and panel feed throughs that can be assembled on-site.

Connectors ensure functionality. As core elements of electrical and optical termination, connection and infrastructure technologies, they are essential in enabling the modular construction of devices, machines and systems across an extremely wide range of industrial applications. Their reliability is a crucial factor guaranteeing smooth functioning in the manufacturing area, telecommunications, applications in medical technology – in short, connectors are at work in virtually every conceivable application area. Thanks to the ongoing development of our technologies, our customers enjoy investment security and benefit from durable, long-term functionality.

Industrial production processes are becoming increasingly modular and flexible; this trend also plays a key role in cabling and termination techniques. Production downtimes caused by conversion and servicing work cost facility operators money and, of course, must be minimised as much as possible. If a production facility needs to be relocated or converted, HARTING's PushPull connector system can be used to disconnect and reconnect the industrial lifelines in seconds. To further optimise this process, HARTING has provided the second generation of PushPull V4 with a facelift and new strengths.

Smaller, more powerful and more robust at the same time is the credo in all areas on the way to Industry 4.0. The miniaturized design and high variability of har-flex^® PCB connector provide device manufacturers with a freely scalable connection technology that enables them to meet the demands of miniaturization. 

Signal, Data and Power - the har-flex^® PCB connectors offer a wide range of connection solutions for printed circuit boards, featuring diverse designs and pole counts.

Insulation displacement connectors (IDC for short) are the ideal solution for device manufacturers if two or more PCBs are to be connected across longer distances. Where normal mezzanine or mother/daughter card arrangements are no longer sufficient, the IDC delivers reliable connectivity via ribbon cables.

For many years, D-Sub PCB connectors have provided a proven interface for data, signal and power supply in industrial applications. For HARTING, the D-Sub is more than just a bus connector.

HARTING connectors are used in vision systems for the reliable transmission of power, signal, and data.   

As one of the largest manufacturers of industrial connection technology, HARTING has a comprehensive portfolio of circular connectors in all common sizes and codings. The product range includes circular connectors, overmoulded cable assemblies as well as  PCB connectors and panel feed throughs that can be assembled on-site.

Connectors ensure functionality. As core elements of electrical and optical termination, connection and infrastructure technologies, they are essential in enabling the modular construction of devices, machines and systems across an extremely wide range of industrial applications. Their reliability is a crucial factor guaranteeing smooth functioning in the manufacturing area, telecommunications, applications in medical technology – in short, connectors are at work in virtually every conceivable application area. Thanks to the ongoing development of our technologies, our customers enjoy investment security and benefit from durable, long-term functionality.

Our little giant Tw1ster brings data and power on one pair of wires to previously unattainable locations, thus challenging existing bus systems. HARTING relies on an alliance of research, industry and standardisation for single pair Ethernet. As part of this alliance, international standardisation committees have completed a multi-stage selection process in favour of the HARTING Technology Group’s SPE mating face. This also ensures planning security for the designers of new devices or sensor/actuator technology, permitting them to actively commence the implementation of SPE in the respective device technology.

The ix Industrial^® enables the transmission of standard 4-8 wire Ethernet and low-voltage power / signal in a smaller connector.  Compared to an RJ45, the ix Industrial^® is 70% smaller and more robust, making it ideal for industrial applications where space constraints are a concern.

1.27 mm pitch general purpose board connectors available in all pin counts from 6-100.  Hybrid and 2.54 mm pitch power versions are also available.

M12 with magnetics integrated into the connector offers substantial space savings on board compared to standard M12s.

HARTING RJ45 plug RJ Industrial® is a complete, perfectly matched Ethernet cabling system for building automation and industry.

For many years, D-Sub PCB connectors have provided a proven interface for data, signal and power supply in industrial applications. For HARTING, the D-Sub is more than just a bus connector.

HARTING Interface and board level connectors have been used extensively in the connection of power, signal, and data in drives.  Our connector portfolio meets all design trends such as miniaturization, robustness, and higher data transfer rates. 

Wide range of industrial connectors in a variety of sizes and IP ratings.  Used for the transmission of power, signal, and data.

Connectors ensure functionality. As core elements of electrical and optical termination, connection and infrastructure technologies, they are essential in enabling the modular construction of devices, machines and systems across an extremely wide range of industrial applications. Their reliability is a crucial factor guaranteeing smooth functioning in the manufacturing area, telecommunications, applications in medical technology – in short, connectors are at work in virtually every conceivable application area. Thanks to the ongoing development of our technologies, our customers enjoy investment security and benefit from durable, long-term functionality.

Available in sizes M8, M12, and M23 with coding options A, B, D, L, P, S, X, and Y.

The ix Industrial^® is a miniaturized Ethernet connector for 4-8 wire Ethernet that is 70% smaller and more robust than an RJ45.  With Power over Ethernet (PoE) capabilities, it can reduce the number of components needed for the transmission of power and data.

Smaller, more powerful and more robust at the same time is the credo in all areas on the way to Industry 4.0. The miniaturized design and high variability of har-flex^® PCB connector provide device manufacturers with a freely scalable connection technology that enables them to meet the demands of miniaturization. Signal, Data and Power - the har-flex^® PCB connectors offer a wide range of connection solutions for printed circuit boards, featuring diverse designs and pole counts.

RJ45 plug for demanding tasks – from printed circuit boards to patch panels, whether IP20 or IP65/67, in proven Han^® 3 A hoods/housing. The HARTING RJ Industrial^® is a complete, perfectly matched Ethernet cabling system for building automation and industry. It is a solution that can be used for all applications with equal success.

For many years, D-Sub PCB connectors have provided a proven interface for data, signal and power supply in industrial applications. For HARTING, the D-Sub is more than just a bus connector.

The IEC standard 61076-2-010 finally brings an industry-wide uniform push-pull locking system for circular connectors in factory automation. Slow screwing was yesterday. With PushPull it's: Click & Connect! Simple, fast and reliably connected. Regardless of whether the device socket is vertical or recessed, a PushPull locking system in accordance with IEC 61076-2-010 always gives device manufacturers the right solution from a single source.

HARTING connectors are used for the reliable transmission of power, signal, and data in electric motors and linear actuators.

The Han^® 1A is a compact general purpose connector system that can be used to connect motors.  The system is built on a modular concept with various hoods, inserts, housings and accessories.

M12 with magnetics integrated into the connector offers substantial space savings on board compared to standard M12s.

Available in sizes M8, M12, 7/8", M17 and M23 with coding options A, B, D, L, P, S, X, and Y.

Available in sizes M8, M12, and M23 with coding options A, B, D, L, P, S, X, and Y.

M23 circular connectors are used in industrial applications when high power must be transmitted or many signal contacts must be bundled. They are typically used for drives.

Industrial production processes are becoming increasingly modular and flexible; this trend also plays a key role in cabling and termination techniques. Production downtimes caused by conversion and servicing work cost facility operators money and, of course, must be minimised as much as possible. If a production facility needs to be relocated or converted, HARTING's PushPull connector system can be used to disconnect and reconnect the industrial lifelines in seconds. To further optimise this process, HARTING has provided the second generation of PushPull V4 with a facelift and new strengths.

HARTING provides board and I/O connectors for the transmission of power, signal, and data to and from PLCs

One billion combinations possible / Order modules as from batch size 1

Industrial production processes are becoming increasingly modular and flexible; this trend also plays a key role in cabling and termination techniques. Production downtimes caused by conversion and servicing work cost facility operators money and, of course, must be minimised as much as possible. If a production facility needs to be relocated or converted, HARTING's PushPull connector system can be used to disconnect and reconnect the industrial lifelines in seconds. To further optimise this process, HARTING has provided the second generation of PushPull V4 with a facelift and new strengths.

The ix Industrial^® is a miniaturized Ethernet connector for 4-8 wire Ethernet that is 70% smaller and more robust than an RJ45.  With Power over Ethernet (PoE) capabilities, it can reduce the number of components needed for the transmission of power and data.

Standard mating face for the transmission of Ethernet over a single pair of twisted wires. 

Available in sizes M8, M12, 7/8", M17 and M23 with coding options A, B, D, L, P, S, X, and Y.

Available in sizes M8, M12, and M23 with coding options A, B, D, L, P, S, X, and Y.

Wide range of robust PCB connectors with 1.27 mm pitch, available in all pin even pin counts from 6-100.  Power and hybrid versions also available.

The DIN connectors has proven itself millions of times as a tested classic for connecting circuit boards and backbones. HARTING customers praise its robustness and the continual advancements and optimisations.

On top of all ethernet network installers wishlist is the easy and fast assembly of network infrastructure. In traditional RJ 45 solutions for industrial networks, the time for confection is 50% for preparation of the cable and 50% for connecting. With our new RJ Industrial® Multifeature you'll get an absolutely robust and reliable connector with integrated cutting tools for fast and easy assembly. A time saving of about 25% in the assembly is possible.

Insulation displacement connectors (IDC for short) are the ideal solution for device manufacturers if two or more PCBs are to be connected across longer distances. Where normal mezzanine or mother/daughter card arrangements are no longer sufficient, the IDC delivers reliable connectivity via ribbon cables.

HARTING provides  I/O connectors for the transmission of power, signal, and data to and from sensors.  Smart connector design enables easy installation and space savings. 

Available in sizes M8, M12, 7/8", M17 and M23 with coding options A, B, D, L, P, S, X, and Y.

Available in sizes M8, M12, and M23 with coding options A, B, D, L, P, S, X, and Y.

Simplify installation and save space around the connector with integrated PushPull functionality. 

Reduces space and required components by using M12 connectors with integrated magnetics. 

Standard mating face for the transmission of Ethernet over a single pair of twisted wires.

The ix Industrial^® is a miniaturized Ethernet connector for 4-8 wire Ethernet that is 70% smaller and more robust than an RJ45. With Power over Ethernet (PoE) capabilities, it can reduce the number of components needed for the transmission of power and data.

Industrial production processes are becoming increasingly modular and flexible; this trend also plays a key role in cabling and termination techniques. Production downtimes caused by conversion and servicing work cost facility operators money and, of course, must be minimised as much as possible. If a production facility needs to be relocated or converted, HARTING's PushPull connector system can be used to disconnect and reconnect the industrial lifelines in seconds. To further optimise this process, HARTING has provided the second generation of PushPull V4 with a facelift and new strengths.